Table of Contents
Advertisement
Table 6. Firmware Error Codes (continued)
Error Code
20EE 0006
20EE 0007
20EE 0008
20EE 0009
20EE 000B
120
Service Guide
Description
No recognized SCSI adapter present
Keyboard not found
No configurable adapters were found
in the system by the remote IPL
menu in the SMS utilities
Unable to communicate with the
service processor
The system was not able to find an
operating system boot record on the
devices listed in the boot list. This
can be caused by the wrong devices
being in the boot record, a problem
that prevents the system from
communicating with the device that
contains the boot record, or the boot
record being corrupted.
Action/ Possible Failing FRU
This warning occurs when the
selected SMS function cannot locate
any SCSI adapter supported by the
function. If a supported SCSI adapter
is installed:
1. Replace SCSI adapter(s).
2. Replace the system board. (See
note 3 on page 41.) Location: P1
1. Plug in keyboard.
2. Replace the system board. (See
note 3 on page 41.) Location: P1
This warning occurs when the remote
IPL menu in the SMS utilities cannot
locate any LAN adapters that are
supported by the remote IPL function.
If a supported device is installed:
1. Replace the device or adapter.
2. Replace the I/O drawer planar in
the drawer(s) containing the
adapter.
Replace the system board. (See note
3 on page 41.) Location: P1
Go to "Boot Problems and Concerns"
on page 102.
Advertisement
Table of Contents
