Replacing Hot-Plug Ssa Disk Drives - IBM F80 Service Manual

Replacing Hot-Plug SSA Disk Drives

Review the information in "Disk Drive Options" on page 317 before installing a disk
drive.
Note: SSA bays require a carrier in all six slots of each 6-pack assembly. Either an
To replace an SSA hot-plug disk drive, perform the following steps:
1. Remove the disk drive from its protective packaging and open the drive latch
handle.
326
Service Guide
SSA drive in a carrier or a blank carrier must be in each SSA drive position. To
add an SSA drive, you must first remove the blank carrier from the slot.