8. Select SSA Disks.
9. Select SSA Physical Disks.
10. Select Identify an SSA Physical Disk.
11. Select the disk you want to remove from the list.
Note: If the drive is missing, skip to step 18.
12. Select Flash Disk Identification Light. Check the disk drives to determine the
one with the flashing amber LED.
13. Press F3 to return to the SSA Physical Disks menu.
14. Select Remove an SSA Physical Disk.
15. Select the desired disk from the list on the screen and press Enter.
16. Follow the instructions on the screen to remove the drive.
17. When you are asked "Are you sure?" answer "Yes" and press Enter.
18. Remove the disk drive by pulling the disk drive lever toward you until it is
completely open. Then remove the disk drive.
19. Insert a blank SSA disk drive filler in the empty disk drive slot.
20. Press F10 to exit smitty.
Chapter 9. Removal and Replacement Procedures
325