Table of Contents
Advertisement
SSA Drive Bay Cables
6
5
2
1
I
C Connector
2
Power Connector
3
Power Connector
4
SSA Connector
7. Remove the six screws that hold the disk drive cage in the system unit. There are
four screws in the front of the unit and two inside the back (one at the upper left,
one at the lower right). Use the long nut driver provided with the disk drive cage to
remove the screws.
8. Slide the disk drive cage all the way out of the system unit.
7
1
5
SSA Connector
6
SSA Connector
7
Power Connector
Chapter 9. Removal and Replacement Procedures
3
2
4
361
Advertisement
Table of Contents
