Changing The Time Location; Changing The Time Format - Standard Horizon Matrix GX2000 Owner's Manual

8.7

CHANGING THE TIME LOCATION

Set the radio to show UTC time or local time with the offset inputted in section
8.6 CHANGING THE GPS TIME.
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu Setup Menu" appears, then select "GENERAL SETUP
Setup Menu Setup Menu
Setup Menu
with the CHANNEL knob.
2. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to "TIME AREA
3. Press the [ SELECT ] soft key.
4. Rotate the CHANNEL knob to select "UTC
CAL CAL CAL".
CAL CAL
5. Press the [ ENT ] soft key to store the selected set-
ting.
6. Press the [ QUIT ] key several times to return to ra-
dio operation.
8.8

CHANGING THE TIME FORMAT

Set the radio to show 12-hour format or 24-hour format of the clock.
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu Setup Menu" appears, then select "GENERAL SETUP
Setup Menu Setup Menu Setup Menu
with the CHANNEL knob.
2. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to select "TIME DISPLAY
3. Press the [ SELECT ] soft key.
4. Rotate the CHANNEL knob to select "12 HOUR
"24 HOUR
24 HOUR 24 HOUR
24 HOUR". 24 HOUR
5. Press the [ ENT ] soft key to store the selected set-
ting.
6. Press the [ CLR ( WX )] key several times to return to
radio operation.
Page 24
TIME AREA TIME AREA
TIME AREA". TIME AREA
TIME DISPLAY TIME DISPLAY
TIME DISPLAY". TIME DISPLAY
GENERAL SETUP GENERAL SETUP
GENERAL SETUP" GENERAL SETUP
UTC" or "LO-
UTC UTC UTC LO- LO- LO- LO-
GENERAL SETUP GENERAL SETUP GENERAL SETUP GENERAL SETUP"
12 HOUR" or
12 HOUR 12 HOUR
12 HOUR
GX2000/GX2100