Changing The Time Location; Changing The Time Format - Standard Horizon MATRIX GX2100 Owner's Manual

8.7

CHANGING THE TIME LOCATION

This menu selection allows the radio to show UTC time or local time with the
offset.
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu" appears, then select "GENERAL SETUP"
with the CHANNEL knob.
2. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to "TIME AREA".
3. Press the [ SELECT ] soft key.
4. Rotate the CHANNEL knob to select "UTC" or "LO-
CAL".
5. Press the [ ENT ] soft key to store the selected set-
ting.
6. Press the [ QUIT ] soft key several times to return to
radio operation.
8.8

CHANGING THE TIME FORMAT

This menu selection allows the radio to setup to show time in 12-hour or 24-
hour format.
1. Press and hold down the [ CALL ( MENU )] key until
"Setup Menu" appears, then select "GENERAL SETUP"
with the CHANNEL knob.
2. Press the [ SELECT ] soft key, then rotate the CHAN-
NEL knob to select "TIME DISPLAY".
3. Press the [ SELECT ] soft key.
4. Rotate the CHANNEL knob to select "12 HOUR" or
"24 HOUR".
5. Press the [ ENT ] soft key to store the selected set-
ting.
6. Press the [ QUIT ] soft key several times to return to
radio operation.
Page 24 GX2000/GX2100