Channel Name Change - Standard Horizon MATRIX GX3000S Owner's Manual

12.12 CHANNEL NAME CHANGE

This selection allows you to customize the name of a channel from the default
name.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup Radio Setup
Radio Setup Radio Setup Radio Setup
2. Press the [ ENT ] key, then select "
"
Radio Setup Radio Setup Radio Setup Radio Setup Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be named, then press the [ ENT ] key.
5. Turn the CHANNEL selector knob to scroll through
the first letter of the channel name.
6. Press the [ ENT ] key to store the first letter in the
name and step to the next letter to the right.
7. Repeat step 6 and 7 until the name is complete. The
name can consist of up to twelve characters, if you
do not use all twelve characters press the [ ENT ] key to move to the next
space. This method can also be used to enter a blank
space in the name. To clear the previous letter, press
the [ CLR ] key.
8. Press and hold the [ ENT ] key to save the name.
9. If you want to enter the name of another channel,
" then press the [ ENT ] key. Otherwise,
select " Next Next
Next Next Next
" then press the [ ENT ] key.
select " Exit Exit
Exit Exit Exit
10. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
GX3000S
" menu appears.
" menu with the CHANNEL selector
CH Name CH Name CH Name " in the
CH Name CH Name
Page 65