Dsc Test Call By Manually Entering Mmsi - Standard Horizon GX2000E Owner's Manual

9.12.3 DSC Test Call by Manually Entering MMSI

1. Press the [ CALL ( MENU )] key. The "DSC
Menu" will appear.
2. Rotate the CHANNEL knob to select "DSC
TEST", then press the [ SELECT ] soft key.
3. Rotate the CHANNEL knob to select "MANUAL" and
press the [ SELECT ] soft key.
4. Rotate the CHANNEL knob to select the first
digit in the MMSI and press the [ SELECT ] soft
key.
5. Repeat step 4 until all the numbers of the
MMSI are shown on the display.
6. Press and hold the [ SELECT ] soft key to show
the Test Call page.
7. Press the [ YES ] soft key to transmit the DSC
Test Call to the other vessel.
After the radio receive a Test Call reply from ves-
sel that was called, the radio will ring and show
TEST ACK display, which confirms the radio you
called received the test call.
Page 78
NOTE
GX2000E/GX2100E