Assigning Soft Keys - Standard Horizon ECLIPSE DSC+ GX1200E Owner's Manual

10.1.7.2 Assigning Soft Keys

1. Press and hold the
MENU " appears, then select " GENERAL
SETUP " with the
2. Press the
the /
3. Press the
the /
(to change the function of selected soft
keys).
4. Press the
the /
you want to change.
5. Press the
the /
function to be assigned, and press the
soft key. Available functions are
listed below.
DISPLAY
SCAN
DW
PRESET
WX
PRE0 to PRE9
6. Repeat steps 4 and 5 to program the other soft keys. The factory
defaults are Key 1:
function.
PRESET
7. To exit this menu and return to radio operation mode press the
or press the
GX1200E
key until " SETUP
/ key.
soft key, then press
key to " SOFT KEYS ".
soft key, then press
key to select " KEY ASSIGN "
soft key, then press
key to select the key that
soft key, then press
key to select the new
Starts and stops scanning.
Starts and stops the dual watch scan.
Saves or deletes the preset memory channel.
Immediately recalls the last select weather channel.
Immediately recalls the preset memory channels.
, Key 2:
soft key four times.
-SETUP MENU-
GENERAL SETUP
CH FUNC SETUP
-GENERAL SETUP-
DSC SETUP
-SOFT KEYS-
NUMBER OF KEYS
KEY ASSIGN
KEY TIMER
FUNCTION
, Key 3:
TIME DISPLAY
KEY BEEP
SOFT KEYS
-KEY ASSIGN-
[ 1]:WX
[ 2]:SCAN
[ 3]:DW
-KEY ASSIGN-
NONE
SCAN
DW
, and Key 4:
Page 77
key