Printing A Configuration Label - Monarch 9855 Operator's Handbook Manual

Printing a Configuration Label

The RFID configuration label displays the module's Firmware and Hardware Versions, Module
Type, Region, Frequency, all the Setup, RFID Menu options, Good RFID Tags (number of RFID
tags successfully programmed since last cleared), and Bad RFID Tags (number of RFID tags
that failed programming since last cleared).
Depending on your application and volume of labels printed, you may want to print this
configuration label daily or after each batch.
To print a configuration label, from the Main Menu, select Setup, then RFID. Then follow these
steps.
Press  or  until you see
1.
RFID SETUP
 Print Config
Press Enter/Pause. The configuration label prints.
2.
3. Press Escape/Clear until you see the Main Menu.
Setting RFID Options 7-7