P r o m p t S e t
Prompt set determines which language displays on the printer's menu. You can select English,
French, German, Spanish-ES, Japanese, Portuguese, Italian, Swedish, Spanish 2, Danish,
Dutch, Finnish, and Norwegian. Some prompts may remain in English, even if you select a
different language.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow these
steps.
Press or until you see
1.
DEFAULTS
Prompt Set
2.
Press Enter/Pause. The current setting is displayed, for example:
PROMPT SET
English
Press or until you see the option you want. Then press Enter/Pause. Press
Escape/Clear until you see the Main menu.
Note:
This option only affects the displayed prompts. It does not change what is printed by
the printer.
F l a s h S t o r a g e
Flash storage allows packets (with "R" or "N" selectors) to be stored in flash memory, instead
of volatile RAM. Packets stored in flash memory are saved when the printer is turned off.
However, flash memory storage is limited.
Note:
You must format flash memory before enabling this option. Formatting flash memory
is only required once during initial printer setup.
To change the setting, from the Main Menu, select Setup, then Defaults. Then, follow these
steps.
Press or until you see
1.
DEFAULTS
Flash Storage
Press Enter/Pause. The current setting is displayed, for example:
2.
FLASH STORAGE
Disabled
Press or until you see the option you want. Then press Enter/Pause. Press
3.
Escape/Clear until you see the Main menu.
Setting Defaults 6-5