Using Immediate Commands - Monarch 9855 Operator's Handbook Manual

U s i n g I m m e d i a t e C o m m a n d s
Your System Administrator can use immediate commands to reset the printer or cancel and
repeat batches. Immediate commands are turned on or off through an MPCL packet. Your
System Administration should refer to the Packet Reference Manual (available on our Web
site) for more information about immediate commands and control characters.
Use this option to set whether the ADK script processes or ignores an immediate command
control character.
To enable the ADK script to process immediate commands:
From the Script Menu, press  or  until you see
1.
SCRIPTS
 Immed Commands
2. Press Enter/Pause.
Enable Immed?
 Yes
Use  or  to select either "Yes" or "No" and press Enter/Pause. The default is "No."
3.
Selecting "Yes" allows the immediate command control character to be processed by
the printer and performs the requested immediate command.
Selecting "No" prevents the script and printer from processing the immediate command
control character. Instead, the immediate command control character and immediate
command are treated as data.
Press Escape/Clear until you see the Main Menu.
4.
Using Scripts 8-5