Factory-Installed Options; Ethernet Information; Rf Information - Monarch 9855 Operator's Handbook Manual

F a c t o r y - I n s t a l l e d O p t i o n s

7411™ Print Server for 802.11b wireless networks (also supports wired Ethernet printing).

300 dpi printhead (12678401)

Internal Ethernet Print Server supports TCP/IP (12691303)

Peel mode with on-demand sensor

Knife-ready (order Knife separately)

Ethernet Information

Monarch® offers internal and external Ethernet connectivity solutions. These solutions make it
easy to set up, manage, and monitor a printer linked to an Ethernet connection. The print
server provides multiprotocol capabilities for users with Windows® 95/98/2000 or Windows
NT®, TCP/IP, and NetWare®. Software is available on our Web site to configure the print
server. It can also be configured using HP Jet Admin™ or HP Web JetAdmin™ software.
Configuration information prints automatically if the Ethernet print server senses a hardware
error. To print configuration information on demand, press the Test button on the side of the
external Ethernet print server unit or use the configuration utility provided for your network -
operating system. The configuration label prints in MPCL format.
Note: The configuration label is best displayed using 4" wide by 6" long labels. If the label
is too small, some information may print outside the label edges.

RF Information

We offer the 7411 Print Server that communicates with printers on an 802.11b wireless
network. You can use the print server in ad-hoc (peer-to-peer) or infrastructure (access point)
wireless mode. In addition, the wireless print server includes a unique dual-mode built-in
wired Ethernet connection. You can switch between wired and wireless mode without any loss
of data.
B-2 Operator's Handbook