D e l e t i n g a S c r i p t
You can delete a script from the printer's memory.
To delete a script:
From the Script Menu, press or until you see
1.
SCRIPTS
Delete Script
2.
Press Enter/Pause.
Are you sure?
Yes
Use or to select either "Yes" or "No" and press Enter/Pause. Selecting "Yes" deletes
3.
the current script.
Note:
The flash memory used by the script is not available for other scripts or fonts until the
flash memory is reformatted. However, when you format flash memory, you must
resend the script and any downloaded fonts to the printer.
Press Escape/Clear until you see the Main Menu.
4.
E n a b l i n g S t a t u s P o l l i n g
Status polling allows you to obtain information about the readiness of the printer and the
current (or last received) print job. Your System Administrator can enable status polling while
the printer is running in Script mode. To enable status polling:
From the Script Menu, press or until you see
1.
SCRIPTS
Status Polling
Press Enter/Pause.
2.
Enable Polling
No
Use or to select either "Yes" or "No" and press Enter/Pause.
3.
The default is "No."
8-4 Operator's Handbook