Monarch 9855 Operator's Handbook Manual page 17

Hold the printhead assembly by the printhead tab while pressing down on the printhead
9.
release.
10. Close the printhead by pressing down on the thumb well until you hear it click into place.
Thumb Well
11. Close the cover.
12. Press Feed/Cut to position the supply under the printhead.
You may need to adjust the wide/narrow knobs depending on the width of your supply.
See "Adjusting the Wide/Narrow Knobs" for more information.
Note: If the printer will be unused for extended periods of time, we recommend leaving the
printhead unlatched.
Loading Supplies 2-5