U s i n g F l a s h M e m o r y
The flash memory options are listed in the table below.
Option
Format Flash
Unused Flash
Pack Flash
Formatting Flash Memory
Before storing packets in flash memory, downloading a script, or if the printer's firmware is
updated, you must format the flash memory. Formatting flash memory is only required
once during initial printer setup.
Note:
When you format flash memory, the script and any downloaded TrueType® fonts
saved in the printer's flash memory are deleted and must be resent to the printer.
To format flash memory, from the Main Menu, select Setup. Then, follow these steps.
Press or until you see
1.
SETUP
Flash Memory
Press Enter/Pause.
2.
FLASH MEMORY
Format Flash
Press Enter/Pause.
3.
Are you sure?
No
Press to display "Yes" and press Enter/Pause.
4.
CREATING FLASH
FILE SYSTEM 1
The printer's flash memory is cleared and reformatted. This process may take several
minutes. The printer automatically reboots after formatting flash memory. You return
to "Print Mode Ready."
6-8 Operator's Handbook
Choices
No/Yes
NA
No/Yes
Default
No
NA
No