C A R E A N D M A I N T E N A N C E
This chapter tells you how to
clear label jams and clean the printer.
replace a printhead.
Do not use sharp objects to clean the printhead or touch the printhead with your
fingers; this may damage the printer.
L a b e l J a m s
When you are printing and a jam occurs, the Fault light on the printer's front panel blinks. To
clear the jam:
1.
Turn off the printer and open the cover and printhead assembly.
2.
If necessary, remove the label roll and ribbon.
Remove the jammed labels and reload the label roll.
3.
Close the printhead assembly and turn on the printer.
4.
5.
Press Feed/Cut to position the supply under the printhead.
1 0
Care and Maintenance 10-1