B a u d R a t e
To change the setting, from the Main Menu select Setup, Port Settings, then Serial Comm. If
password protection in enabled, press Feed/Cut three times, then press Enter/Pause before
you see the Setup Menu options. Then, follow these steps.
Press or until you see
1.
SERIAL COMM
Baud Rate
2.
Press Enter/Pause. The current setting is displayed, for example:
BAUD RATE
9600
Press or to display the baud rate you need, then press Enter/Pause. Press
Escape/Clear until you see the Main Menu.
W o r d L e n g t h
To change the setting, from the Main Menu select Setup, Port Settings, then Serial Comm.
Then, follow these steps.
Press or until you see
1.
SERIAL COMM
Word Length
Press Enter/Pause. The current setting is displayed, for example:
2.
WORD LENGTH
8
Press or to display the word length you need, then press Enter/Pause. Press
3.
Escape/Clear until you see the Main Menu.
5-2 Operator's Handbook