Skip Index - Monarch 9855 Operator's Handbook Manual

S k i p I n d e x
You can use the skip index mode to skip (or ignore) a sense mark and print an image over
multiple labels, if necessary. For example, if you have 4.0" long supplies loaded, but your
image is 8.0" long, enable skip index mode to print the 8.0" long image on two labels. The
image length is determined by the format header. See your System Administrator or the
optional Packet Reference Manual for more information. The skip index feature is useful when
you have a single format that contains two labels, such as a shelf label and a carton label.
Since this feature unnecessarily wastes a label, we do not recommend using skip index mode
with RFID supplies.
Note: When designing the format, make sure text or graphics do not print in the gap of label
rolls.
To change the setting, from the Main menu, select Setup, then Supply.
Press  or  until you see
1.
SUPPLY
 Skip Index
Press Enter/Pause to set the skip index mode. You will see the current setting, for
2.
example:

SKIP INDEX

No
Press  or  to see the other options. After you display the option you want, press
3.
Enter/Pause. Press Escape/Clear until you see the Main Menu.
4-12 Operator's Handbook
