Supply Position - Monarch 9855 Operator's Handbook Manual

Supply Position

This function adjusts the machine to print at the vertical 0,0 point on the supply.
For RFID supplies with a one-inch feed length, refer to the
Utility to adjust the Supply and Print Position settings.
Note: The supply position adjustment should only be made on initial printer setup. For
format adjustments, change the print position.
You may need to adjust the supply in or out to allow

tags and labels to be removed.

die cut labels to be removed easily.
The adjustments are in dots (0.0049 inch).

Increase the number to feed more supply out of the chute.

Decrease the number to feed less supply out of the chute.
This option takes effect on the next label or tag printed. Changing supply position may also
affect print position.
To change the setting, from the Main Menu, select Setup, Supply, then Positioning. Then,
follow these steps.
Press  or  until you see
1.
POSITIONING
 Supply Pos
Press Enter/Pause. The current setting is displayed, for example:
2.
Enter supply pos
[-300/300]: +0
Press  or  to change the supply position. Pressing  decreases the value (feeds less
3.
supply);  increases it (feeds more supply).
4. Press Enter/Pause when the number you need appears. Press Escape/Clear until you
see the Main Menu.

Monarch® RFID Printer Setup
Setting Supply Options 4-7