Mode
To change the setting, from the Main Menu select Setup, Port Settings, then Parallel Comm.
Then, follow these steps.
Press or until you see
1.
PARALLEL COMM
Mode
Press Enter/Pause.
2.
MODE
Compatible
Use or to select either "Compatible" or "IEEE1284." Press Enter/Pause. Use
3.
compatible mode for a computer connection to the printer with a parallel cable. Use IEEE-
1284 for bi-directional Ethernet communications. See Appendix B, "Accessories and
Options" for more information about Ethernet options.
Press Escape/Clear until you see the Main Menu.
4.
5-6 Operator's Handbook