Press Enter/Pause. Then, press or until you see
5.
USER DIAG
Password
6.
Press Enter/Pause. You see
Enable Password
No
The default for password protection is "No," so you always see "No" even IF passwords
are enabled.
7.
If you do not want the user to enter a password before they can delete formats, graphics,
fonts or access the Setup and Scripts menus, press Enter/Pause. You return to the User
Diagnostics menu.
OR
Press to display "Yes" and press Enter/Pause. The password protection is enabled for
formats, graphics, fonts, and access to the Setup and Scripts menus. You return to the
User Diagnostics Menu.
8.
Press Escape/Clear twice to exit to the Main Menu.
Note:
When password protection is enabled, a password is not required to clear batches, but
it is needed to clear formats, graphics, and fonts.
S e r v i c e D i a g n o s t i c s
The Service Diagnostics menu can only be accessed by an Avery Dennison Representative; it
requires a separate password. If you need to call Service, print a test label first.
11-4 Operator's Handbook