Printing - Monarch 9855 Operator's Handbook Manual

P R I N T I N G
This chapter explains how to

use on-demand mode printing.

print an error label.

print, pause, restart, cancel, and repeat a batch.
You can send format, batch, and graphic data to the printer from a host. When the printer
receives the data, batches begin printing automatically. The optional Packet Reference
Manual tells how to create, store, and download the data necessary to print batches. You can
also use the Monarch® MPCL™ Toolbox utilities to create and download packets.
Canc el
All
P r i n t i n g
Before you print, make sure the printer is connected and ready to receive data.
1. Turn on the printer. Your printer is ready to receive and print batches when you see
"PRINT MODE
Download a format and a batch. Refer to the optional Packet Reference Manual for
2.
information on downloading print jobs.
3. The printer prints a strip of labels. If printing RFID supplies, you see "RFID Printing..."
Remove the printed labels.
4.
The RFID printer pauses while programming the RFID tag.
If the RFID tag is not programmable for any reason, the supply may print with an overstrike
pattern, indicating that it should not be used. Your System Administrator should set the
desired Error Action accordingly. See Chapter 4, "Setting Supply Options" for more
information about the error action modes.
When printing on non-RFID supplies, you may also see a label with an overstrike pattern. Do
not use that label.
Note: If the printer will be unused for extended periods of time, we recommend leaving the
printhead unlatched.
An optional keyboard is also available to enter offline batch data. The keyboard must be
purchased separately. If there are offline batches in the print queue, the offline batches print
after the downloaded batches have printed.
B a tch
Prin t
Entry
Mode
Prin t Mode
Read y
Ready."
Main Menu
R epe a t B a tch
Op tions
B a tch
Scripts
S e tup
9
Diag.

Printing 9-1