Batch Separators - Monarch 9855 Operator's Handbook Manual

B a t c h S e p a r a t o r s
A batch separator is an extra tag printed in between batches with a pinstripe pattern. If you
select "Long" for the separator, a double-length (two tags) separator prints. The name of the
batch is shown on the batch separator.
Since this feature unnecessarily wastes a label, we do not recommend using batch separators
with RFID supplies.
Note: Changing this setting only affects new formats sent to the printer.
To change the setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
Press  or  until you see
1.
SUPPLY
 Separators
Press Enter/Pause to set the batch separators option. The current setting is displayed, for
2.
example:
SEPARATORS
No
Press  or  to see the other options. After you display the option you want, press
3.
Enter/Pause. Press Escape/Clear until you see the Main Menu.
Batch Separator


Setting Supply Options 4-11