Adjusting The Cut Position - Monarch 9400 Series Operator's Handbook Manual

Adjusting the Cut Position

This feature adjusts where the tag is cut. For example:
You may need to adjust the cut up or down for aperture
supplies.
If the cut is occurring in the preprint of the supply, move
the cut up.
The default is increase (1) from step zero (0). The steps are in
1/192 inches (one dot). A dot is the smallest area on which the
printer can print. Increase moves the cut up; decrease moves
the cut down.
E
1. From the main menu select Printer Options and press
.
2. When you see
Select Printer Option:
Use Batch Separators
D
press to display Adjust Cut Position, then press
E
.
3. You'll see
Cut adjustment
I)ncrement or D)ecrement? I
5. Setting Printer Options
__
5-3