Mac Notification Commands - D-Link xStack DES-3528 Series Cli Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
MAC N
OTIFICATION
The MAC notification commands in the Command Line Interface (CLI) are listed, in the following table, along with their
appropriate parameters.
Command
enable mac_notification
disable mac_notification
config mac_notification
config mac_notification ports
show mac_notification
show mac_notification ports
Each command is listed, in detail, in the following sections.
enable mac_notification
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable MAC notification without changing basic configuration:
DES-3528:admin# enable mac_notification
Command: enable mac_notification
Success.
DES-3528:admin#
disable mac_notification
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable MAC notification without changing basic configuration:
DES-3528:admin# disable mac_notification
Command: disable mac_notification
Success.
DES-3528:admin#
config mac_notification
Purpose
Syntax
C
OMMANDS
Parameters
{interval <int 1-2147483647> | historysize <int 1-500>}(1)
[<portlist> | all] [enable | disable]
{<portlist>}
Used to enable global MAC address table notification on the Switch.
enable mac_notification
This command is used to enable MAC address notification without changing configuration.
None.
Only Administrator and Operator-level users can issue this command.
Used to disable global MAC address table notification on the Switch.
disable mac_notification
This command is used to disable MAC address notification without changing configuration.
None.
Only Administrator and Operator-level users can issue this command.
Used to configure MAC address notification.
config mac_notification {interval <int 1-2147483647> | historysize <int 1-500>}(1)
294