D-Link xStack DES-3528 Series Cli Reference Manual page 494

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
DES-3528:admin#
Command: config l2protocol_tunnel ports 1-4 type uni tunneled_protocol stp
Success.
DES-3528:admin#
show l2protocol_tunnel
Purpose
This command is used to show Layer 2 protocol tunneling information.
Syntax show l2protocol_tunnel {[uni | nni]}
Description This command is used to show Layer 2 protocol tunneling information.
Parameters uni - (Optional) Specify show UNI detail information.
nni - (Optional) Specify show NNI detail information.
Restrictions None.
Example usage:
To show Layer 2 protocol tunneling information summary:
DES-3528:admin#
Command: show l2protocol_tunnel
Global State: Enabled
UNI Ports: 1-2
NNI Ports: 3-4
DES-3528:admin#
To show Layer 2 protocol tunneling detail information on UNI ports:
DES-3528:admin#
Command: show l2protocol_tunnel uni
UNI Tunneled
Port Protocol
--- -------------------
1 STP
GVRP
01-00-0C-CC-CC-CC
01-00-0C-CC-CC-CD
2 STP
GVRP
DES-3528:admin#
To show Layer 2 protocol tunneling detail information on NNI ports:
DES-3528:admin#
Command: show l2protocol_tunnel nni
NNI Protocol
Port
---- ------------------
1 STP
GVRP
01-00-0C-CC-CC-CC
01-00-0C-CC-CC-CD
2 STP
GVRP
01-00-0C-CC-CC-CC
01-00-0C-CC-CC-CD
DES-3528:admin#
config l2protocol_tunnel ports 1-4 type uni tunneled_protocol stp
show l2protocol_tunnel
show l2protocol_tunnel uni
Threshold
(packet/sec)
------------
10
0
0
0
20
0
show l2protocol_tunnel nni
494