Voice Vlan Commands - D-Link xStack DES-3528 Series Cli Reference Manual

Layer 2 managed stackable fast ethernet switch
Hide thumbs Also See for xStack DES-3528 Series:
Table of Contents

Advertisement

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
V
VLAN C
OICE
The voice VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
enable voice_vlan
disable voice_vlan
config voice_vlan priority
config voice_vlan oui
config voice_vlan ports
config voice_vlan
aging_time
config voice_vlan log state
show voice_vlan
show voice_vlan oui
show voice_vlan ports
show voice_vlan
voice_device ports
Each command is listed, in detail, in the following sections.
enable voice_vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable a voice VLAN:
DES-3528:admin#
Command: enable voice_vlan vlanid 1
Success.
DES-3528:admin#
disable voice_vlan
Purpose
Syntax
Description
OMMANDS
Parameters
[vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
<int 0-7>
[add | delete] <macaddr> < macmask> {description <desc 32>}
[<portlist> | all] [state [enable | disable] | mode [auto | manual]]
<min1-65535>
[enable | disable]
{<portlist>}
{<portlist>}
Used to enable the global voice VLAN function.
enable voice_vlan [<vlan_name 32> | vlanid <vlanid 1-4094>]
This command is used to enable the global voice VLAN function on the Switch. To enable
the voice VLAN, the voice VLAN must be assigned to an existing static 802.1Q VLAN. The
VLAN with assigned voice VLAN cannot be deleted. To change the voice VLAN, the user
must disable the voice VLAN function first, and then re-issue this command. By default, the
global voice VLAN state is disabled.
<vlan_name 32> - Specifies the voice VLAN by VLAN name.
vlanid <vlanid 1-4094> - Specifies the voice VLAN by VLAN ID.
Only Administrator and Operator and Power-User-level users can issue this command.
enable voice_vlan vlanid 1
Used to disable the global voice VLAN function.
disable voice_vlan
This command disables the global voice VLAN function on the Switch. When the voice VLAN
function is disabled, the voice VLAN will become unassigned.
124

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents