D-Link xStack DES-3528 Series Cli Reference Manual page 510

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
delete vlan_counter
Parameters
Restrictions
Example usage:
To stop counting packet levels for all packets on VLAN 1:
DES-3528:admin# delete vlan_counter vlanid 1 all
Command: delete vlan_counter vlanid 1 all
Success.
DES-3528:admin#
clear vlan_counter statistics
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear statistics for VLAN 1-10:
DES-3528:admin# clear vlan_counter statistics vlanid 1-10 port 1-3
Command: clear vlan_counter statistics vlanid 1-10 port 1-3
Success.
DES-3528:admin#
show vlan_counter
Purpose
Syntax
Description
Parameters
all – Specifies to delete all VLAN statistic control entries.
vlan_name – Specifies the VLAN name.
vidlist – Specifies a list of VLANs by VLAN ID.
ports <portlist> – To disable to count statistics by specific port on specific VLAN.
all_frame – The statistics will be stop counting for all packets.
broadcast – Specifies to stop counting broadcast packets
multicast – Specifies to stop counting multicast packets
unicast – Specifies to stop counting unicast packets
packet – Specifies to stop counting at packet level.
byte – Specifies to stop counting at byte level.
Only Administrator and Operator-level users can issue this command.
Used to clear statistics gathered by the VLAN counter.
clear vlan_counter statistics [all | [vlan <vlan_name> | vlanid < vidlist >] [all | ports
<portlist>]]
This command is used to clear statistic gathered by the VLAN counter.
all – Specifies to clear all VLAN statistics
vlan_name – Specifies the VLAN name.
vidlist – Specifies a list of VLANs by VLAN ID.
ports <portlist> – To clear to count statistics by specific port on specific VLAN.
Only Administrator and Operator-level users can issue this command.
This commands displays the statistic control entries created for VLANs.
show vlan_counter {[vlan <vlan_name> | vlanid < vidlist > ]}
This commands displays the statistic control entries created for VLANs.
vlan_name – Specifies the VLAN name.
vlanid – Specifies a list of VLANs by VLAN ID. When VLAN is not specified, all VLAN
counters will be displayed.
510