D-Link xStack DES-3528 Series Cli Reference Manual page 178

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
DES-3528:admin#show igmp_snooping multicast_vlan newmulti
Command: show igmp_snooping multicast_vlan newmulti
IGMP Multicast VLAN Global State
IGMP Multicast VLAN Forward Unmatched
VLAN Name
VID
Member(Untagged) Ports
Tagged Member Ports
Source Ports
Untagged Source Ports
Status
Replace Source IP
Remap Priority
Total Entries: 1
DES-3528:admin#
config mld_snooping multicast_vlan forward_unmatched
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To set unmatched packet to be flooded on the VLAN:
DES-3528:admin# config mld_snooping multicast_vlan forward_unmatched enable
Command: config mld_snooping multicast_vlan forward_unmatched enable
Success.
DES-3528:admin#
:newmulti
:10
:5-10
:
:
:
:Enabled
: 0.0.0.0
:None
Used to configure forwarding mode for MLD Multicast VLAN unmatched packet.
config mld_snooping multicast_vlan forward_unmatched [disable | enable]
When the Switch receives an MLD packet, it will match the packet against the multicast
profile to determine the MLD multicast VLAN to be associated with. If the packet does not
match any profiles, the packet will be forwarded or dropped based on the setting.
By default, the packet will be dropped.
enable − The unmatched packet will be flooded on the VLAN.
disable − The unmatched packet will be dropped.
Only Administrator and Operator and Power-User-level users can issue this command.
: Enabled
: Disabled
178