D-Link xStack DES-3528 Series Cli Reference Manual page 304

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
config authen_enable
Restrictions
Example usage:
To configure the user defined method list "Permit" with authentication methods TACACS, XTACACS and
local.
DES-3528:admin# config authen_enable method_list_name Trinity method tacacs xtacacs
local
Command: config authen_enable method_list_name Trinity method tacacs xtacacs local
Success.
DES-3528:admin#
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that
order:
DES-3528:admin# config authen_enable default method xtacacs tacacs+ local
Command: config authen_enable default method xtacacs tacacs+ local
Success.
DES-3528:admin#
delete authen_enable method_list_name
server group list.

tacacs+ – Adding this parameter will require the user to be authenticated using the
TACACS+ protocol from the remote TACACS+ server hosts of the TACACS+ server
group list.

radius – Adding this parameter will require the user to be authenticated using the
RADIUS protocol from the remote RADIUS server hosts of the RADIUS server
group list.
server_group <string 15> − Adding this parameter will require the user to be

authenticated using a user-defined server group previously configured on the
Switch.
local_enable − Adding this parameter will require the user to be authenticated using

the local user account database on the Switch.

none – Adding this parameter will require no authentication to access the Switch.
method_list_name – Enter a previously implemented method list name defined by the user
(create authen_enable). The user may add one, or a combination of up to four (4) of the
following authentication methods to this method list:

tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.

xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.

tacacs+ – Adding this parameter will require the user to be authenticated using the
TACACS+ protocol from a remote TACACS+ server.
radius − Adding this parameter will require the user to be authenticated using the

RADIUS protocol from a remote RADIUS server.
server_group <string 15> − Adding this parameter will require the user to be

authenticated using a user-defined server group previously configured on the
Switch.
local_enable − Adding this parameter will require the user to be authenticated using

the local user account database on the Switch. The local enable password of the
device can be configured using the "config admin local_enable" command.

none – Adding this parameter will require no authentication to access the
administration level privileges on the Switch.
Only Administrator-level users can issue this command.
304