Jwac Commands - D-Link xStack DES-3528 Series Cli Reference Manual

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
JWAC C
OMMANDS
The Japanese Web-based Access Control commands in the Command Line Interface (CLI) are listed (along with the
appropriate parameters) in the following table.
Command
enable jwac
disable jwac
enable jwac redirect
disable jwac redirect
enable jwac forcible_logout
disable jwac forcible_logout
enable jwac udp_filtering
disable jwac udp_filtering
enable jwac
quarantine_server_monitor
disable jwac
quarantine_server_monitor
config jwac
quarantine_server_error_timeout
config jwac redirect
config jwac virtual_ip
config jwac
config jwac update_server
config jwac switch_http_port
config jwac ports
config jwac radius_protocol
create jwac user
config jwac user
delete jwac
show jwac user
clear jwac auth_state
show jwac
show jwac auth_state ports
show jwac ports
config jwac authorization attributes
config jwac authenticate_page
Parameters
<sec 5-300>
{destination [quarantine_server | jwac_login_page] | delay_time <sec 0–
10>}(1)
<ipaddr> {url [<string 128> | clear]}
[quarantine_server_url <string 128> | clear_quarantine_server_url]
[add | delete] ipaddress <network_address> {[tcp_port <port_number 1-
65535> | udp_port <port_number 1-65535>]}
< tcp_port_number 1–65535> {[http | https]}
[<portlist> | all] {state [enable | disable] | max_authenticating_host <value 0–
50> | aging_time [infinite | <min 1–1440>] | idle_time [infinite | <min 1–
1440>] | block_time [<sec 0–300>]}(1)
[local | eap_md5 | pap | chap | ms_chap | ms_chapv2]
<username 15> {vlan <vlanid 1–4094>}
<username 15> {vlan <vlanid 1–4094>}
[user <username 15> | all_users]
[ports [all | <portlist>] {authenticated | authenticating | blocked} | mac_addr
<macaddr>]
<portlist>
{<portlist>}
{radius [enable| disable] | local [enable | disable]}(1)
<japanese | english>
335