D-Link xStack DES-3528 Series Cli Reference Manual page 311

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
config authen server_group
Restrictions
Example usage:
To add an authentication host to server group "group_1":
DES-3528:admin#
protocol tacacs+
Command: config authen server_group group_1 add server_host 10.1.1.121 protocol
tacacs+
Success.
DES-3528:admin#
delete authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the server group "group_1":
DES-3528:admin# delete server_group group_1
Command: delete server_group group_1
Success.
DES-3528:admin#
show authen server_group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
XTACACS authentication protocol.

tacacs+ – Use this parameter to define the protocol if the server host is using the
TACACS+ authentication protocol.

radius – Use this parameter to define the protocol if the server host is using the
RADIUS authentication protocol.
Only Administrator-level users can issue this command.
config authen server_group group_1 add server_host 10.1.1.121
Used to delete a user-defined authentication server group.
delete authen server_group <string 15>
This command will delete an authentication server group.
<string 15> − Enter an alphanumeric string of up to 15 characters to define the previously
created server group to be deleted.
Only Administrator-level users can issue this command.
Used to show the authentication server groups.
show authen server_group <string 15>
This command will display authentication server groups currently configured on the Switch.
This command will display the following fields:
Group Name: The name of the server group currently configured on the Switch, including
built in groups and user defined groups.
IP Address: The IP address of the server host.
Protocol: The authentication protocol used by the server host.
<string 15> − Enter an alphanumeric string of up to 15 characters to define the previously
created server group to be viewed.
Entering this command without the <string> parameter will display all authentication server
groups on the Switch.
Only Administrator-level users can issue this command.
311