D-Link xStack DES-3528 Series Cli Reference Manual page 48

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
delete snmp group
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete the SNMP group named "sg1":
DES-3528:admin# delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3528:admin#
show snmp groups
Purpose
Used to display the group-names of SNMP groups currently configured on the Switch. The
security model, level, and status of each group are also displayed.
Syntax show snmp groups
Description This command displays the group-names of SNMP groups currently configured on the
Switch. The security model, level, and status of each group are also displayed.
Parameters None.
Restrictions None.
Example usage:
To display the currently configured SNMP groups on the Switch:
DES-3528:admin# show snmp groups
Command: show snmp groups
Vacm Access Table Settings
Group Name
ReadView Name
WriteView Name
Notify View Name : CommunityView
Securiy Model
Securiy Level
Group Name
ReadView Name
WriteView Name
Notify View Name : CommunityView
Securiy Model
Securiy Level
Group Name
ReadView Name
WriteView Name
Notify View Name : restricted
Securiy Model
Securiy Level
CTRL+C ESC q Quit
Used to remove an SNMP group from the Switch.
delete snmp group <groupname 32>
This command is used to remove an SNMP group from the Switch.
<groupname 32> − An alphanumeric name of up to 32 characters that will identify the SNMP
group the new SNMP user will be associated with.
Only Administrator-level users can issue this command.
: public
: CommunityView
:
: SNMPv1
: NoAuthNoPriv
: public
: CommunityView
:
: SNMPv2
: NoAuthNoPriv
: initial
: restricted
:
: SNMPv3
: NoAuthNoPriv
SPACE n Next Page ENTER Next Entry a
48
All