D-Link xStack DES-3528 Series Cli Reference Manual page 115

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
DES-3528:admin#
show vlan
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's current VLAN settings:
DES-3528:admin# show vlan
Command: show vlan
VLAN Trunk State
VLAN Trunk Member Ports
VID : 1
VLAN Type : Static
Member Ports : 1-28
Static Ports : 1-28
Current Tagged Ports
Current Untagged Ports: 1-28
Static Tagged Ports
Static Untagged Ports : 1-28
Forbidden Ports
VID : 100
VLAN Type : Dynamic
Member Ports : 8
Static Ports :
Current Tagged Ports
Current Untagged Ports:
Static Tagged Ports
Static Untagged Ports :
Forbidden Ports
Total Static VLAN Entries : 1
Total GVRP VLAN Entries: 1
DES-3528:admin#
DES-3528:admin# show vlan ports 1-4
Command: show vlan ports 1-4
Port VID Untagged
----- ---- --------
1 1 X
2 1 X
3 1 X
4 1 X
Used to display the current VLAN configuration on the Switch.
show vlan { [<vlan_name 32> | vlanid < vidlist > | ports {<portlist>}]}
This command displays summary information about each VLAN including the VLAN ID,
VLAN name, the Tagging/Untagging status, and the Member/Non-member/Forbidden status
of each port that is a member of the VLAN.
<vlan_name 32> − The VLAN name of the VLAN for which to display a summary of settings.
<vidlist> − Specifies a list of VLANs by VLAN ID.
<portlist> - Specifies the port to be displayed.
None.
:Enabled
:1-5
VLAN Name
Advertisement
:
:
:
VLAN Name
Advertisement
: 8
:
:
Tagged Dynamic
------ -------
- -
- -
- -
- -
: default
: Enabled
:
: Enabled
Forbidden
---------
-
-
-
-
115