D-Link xStack DES-3528 Series Cli Reference Manual page 59

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
show firmware information
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the current firmware information on the Switch:
DES-3528:admin# show firmware information
Command: show firmware information
Image ID : 1
Version : 2.01.B042
Size : 4262112 Bytes
Update Time:
From : Serial Port(Prom)
User : Serial Port(Prom)
Image ID : 2(Boot up firmware)
Version : 2.60.B010
Size : 4652268 Bytes
Update Time: 2010/05/29 14:36:20
From : 192.168.69.200
User : Guest(WEB)
DES-3528:admin#
show config
Purpose
Syntax
Description
Used to display the firmware section information.
show firmware information
This command is used to display the firmware section information.
None.
None
0 days 00:00:00
Used to display the current or saved version of the configuration settings of the Switch.
show config [[effective | modified | current_config | config_in_nvram <config_id 1-2>]
{[include | exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}}
{[include | exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}}
{[include | exclude | begin] <filter_string 80> {<filter_string 80> {<filter_string 80>}}}}} |
information]
This command is used to display all the configuration settings that are saved to NV RAM or
display the configuration settings as they are currently configured. Use the keyboard to list
settings one line at a time (Enter), one page at a time (Space) or view all (a).
The configuration settings are listed by category in the following order:
59