D-Link xStack DES-3528 Series Cli Reference Manual page 67

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Managed Switch CLI Reference Guide
clear log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the log information:
DES-3528:admin# clear log
Command: clear log
Success.
DES-3528:admin#
show log
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the Switch's history log:
DES-3528:admin# show log index 1-5
Command: show log index 1-5
Index Time
----- -------------------
5 00000 days 00:01:09
4 00000 days 00:00:14
3 00000 days 00:00:06
2 00000 days 00:00:01
Used to clear the Switch's history log.
clear log
This command will clear the Switch's history log.
None.
Only Administrator and Operator-level users can issue this command.
Used to display the Switch's history log.
show log {[index <value_list> | severity {module <module_list>} {emergency | alert |
critical | error | warning | notice | informational | debug | <level_list 0-7>} | module
<module_list>]}
This command will display the contents of the Switch's history log.
−
index <value_list> This parameter specifies the range of log index to show. For example,
show log index 1-5 will display the history log from 1 to 5.
severity - Specifies the severity level indicator.
module - Specifies the module list used.
<module_list> - Enter the module list used here.
emergency - Specifies that the severity will be set to emergency.
alert - Specifies that the severity will be set to alert.
critical - Specifies that the severity will be set to critical.
error - Specifies that the severity will be set to error.
warning - Specifies that the severity will be set to warning.
notice - Specifies that the severity will be set to notice.
informational - Specifies that the severity will be set to informational.
debug - Specifies that the severity will be set to debug.
<level_list 0-7> - Enter the level list value here. This value must be between 0 and 7.
module - Specifies the module list used.
<module_list> - Enter the module list used here.
None.
Log Text
----------------------------------
Successful login through Console (Username: Anonymous)
System started up
Port 1 link up, 100Mbps FULL duplex
Spanning Tree Protocol is disabled
67