Configuring Uplink Interfaces And Downlink Interfaces; Configuring Uplink Interfaces; Configuring Downlink Interfaces - HP FlexFabric 5700 Series Configuration Manual

Tasks at a glance
(Optional.)
mappings
(Optional.)
Configuring uplink interfaces and downlink
interfaces
After configuring the switch to operate in NPV mode, configure the uplink interfaces and downlink
interfaces.

Configuring uplink interfaces

Uplink interfaces must be VFC interfaces in NP mode.
To configure an uplink interface:
Step
1. Enter system view.
2. Enter VFC interface view.
3. Configure the mode of
the interface to as NP.

Configuring downlink interfaces

Downlink interfaces must be VFC interfaces in F mode.
To configure a downlink interface:
Step
1. Enter system view.
2. Enter VFC
interface view.
3. Configure the
mode of the
interface to as F.
Configuring downlink-to-uplink interface
Initiating a disruptive load-balancing process
Command
system-view
interface vfc interface-number
fc mode np
Command
system-view
interface vfc interface-number
fc mode f
Remarks
N/A
N/A
Remarks
N/A
This interface is connected to the core
switch.
The default setting is F mode for an
interface on an NPV switch.
Remarks
N/A
This interface is connected to a node.
The default setting is F mode for an
interface on an NPV switch.
95