Printronix T3204 Maintenance Manual page 19

Indicators and Switches
Indicator Lights:
Switches:
LCD Display:
Host Interfacing
Serial:
Electrical:
Baud Rate:
Character Set:
Word Length:
Handshaking:
Electrical
Power Source:
Circuit Protection:
Grounding:
Environmental
Operating Temp:
Storage Temp:
Operating RH:
Storage RH:
Ventilation:
Dust:
Physical
Dimensions:
Introduction and Overview
POWER, RIBBON/MEDIA, ON LINE/PAUSE
POWER, ON LINE/PAUSE, FEED, CANCEL
2 x 16 characters for error messages, print status, and
recalling stored formats
RS–232C or RS–422
300, 600, 1200, 2400, 4800, 9600, or 19,200 baud
ANSI ASCII
Selectable 7-bit or 8-bit data format
XON/XOFF (in receive mode only) and CTS/DTR
90–132 VAC or 180–264 VAC, 47–63 Hz
Two 2 amp, 250V slo-blo fuses
Printer must be connected to a properly grounded
receptacle
40ºF to 100ºF (4ºC to 38ºC)
–40ºF to 120ºF (–40ºC to 49ºC)
10% to 90% non-condensing
5% to 95% non-condensing
Convection cooled
Non-conducting, non-corrosive
11.4"H x 10"W x 18.3"D (289.6 mmH x 154 mmW x
464.8 mmD)
1–9