Table 161 IP Application > DiffServ > 2-rate 3 Color Marker > DSCP Profile (continued)
LABEL
Yellow
Red
Delete Profile
Delete
Cancel
37.4 DSCP-to-IEEE 802.1p Priority Settings
You can configure the DSCP to IEEE 802.1p mapping to allow the Switch to prioritize all traffic
based on the incoming DSCP value according to the DiffServ to IEEE 802.1p mapping table.
The following table shows the default DSCP-to-IEEE802.1p mapping.
Table 162 Default DSCP-IEEE 802.1p Mapping
DSCP VALUE
IEEE 802.1p
37.4.1 Configuring DSCP Settings
To change the DSCP-IEEE 802.1p mapping, click the DSCP Setting link in the DiffServ screen to
display the screen as shown next.
Figure 205 IP Application > DiffServ > DSCP Setting
Chapter 37 Differentiated Services
DESCRIPTION
This field displays the DSCP value to use for packets with medium packet loss priority.
This field displays the DSCP value to use for packets with high packet loss priority.
Select the entry(ies) that you want to remove in the Delete Profile column.
Click the Delete button to remove the selected entry(ies) from the table.
Click this to revert the fields to the previous configuration.
0 – 7
8 – 15
16 – 23
0
1
2
GS3700/XGS3700 Series User's Guide
24 – 31
32 – 39
40 – 47
3
4
5
311
48 – 55
56 – 63
6
7