Pppoe Ia Per-Port - ZyXEL Communications GS3700 Series User Manual

Table 129 Advanced Application > PPPoE > Intermediate Agent (continued)
LABEL
Apply
Cancel

29.3.1 PPPoE IA Per-Port

Use this screen to specify whether individual ports are trusted or untrusted ports and have the
Switch add extra information to PPPoE discovery packets from PPPoE clients on a per-port basis.
Note: The Switch will drop all PPPoE packets if you enable the PPPoE Intermediate Agent
on the Switch and there are no trusted ports.
Click the Port link in the Intermediate Agent screen to display the screen as shown.
Figure 165 Advanced Application > PPPoE > Intermediate Agent > Port
The following table describes the labels in this screen.
Table 130 Advanced Application > PPPoE > Intermediate Agent > Port
LABEL
Port
*
Chapter 29 PPPoE
DESCRIPTION
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
This field displays the port number.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
GS3700/XGS3700 Series User's Guide
253