ZyXEL Communications GS3700 Series User Manual page 303

Click Rule Configuration in the IP Application > Policy Routing screen to display the screen as
shown.
Figure 197 IP Application > Policy Routing > Rule Configuration
The following table describes the labels in this screen.
Table 158 IP Application > Policy Routing > Rule Configuration
LABEL DESCRIPTION
Profile Name This field displays the policy routing profile(s) you configure in the IP Application >
Policy Routing screen.
Select a profile for which you want to configure a policy routing rule.
Sequence Enter the rule number from 1 to 64. The ordering of your rules is important as rules are
applied in turn.
You can not specify a number already in use by another rule.
Statement Select Permit to forward traffic that matches this rule to the gateway specified in the rule.
Select Deny to disable the rule action and forward traffic that matches this rule according
to the routing table on the Switch.
Classifier This field displays the available active classifiers you configure in the Classifier screen
(see Chapter 18 on page
Select a classifier to which this policy routing rule applies.
Action Enter the IP address of the gateway. The gateway is an immediate neighbor of your Switch
that will forward the packet to the destination.
Chapter 36 Policy Routing
156), which are not used by any policy rule or policy routing rule.
GS3700/XGS3700 Series User's Guide
303