Supported Mibs; Snmp Traps - ZyXEL Communications GS3700 Series User Manual

Gbe l2+ switch
Hide thumbs Also See for GS3700 Series:
Table of Contents

Advertisement

43.3.2 Supported MIBs

MIBs let administrators collect statistics and monitor status and performance.
The Switch supports the following MIBs:
• SNMP MIB II (RFC 1213)
• RFC 1157 SNMP v1
• RFC 1493 Bridge MIBs
• RFC 1643 Ethernet MIBs
• RFC 1155 SMI
• RFC 2674 SNMPv2, SNMPv2c
• RFC 1757 RMON
• SNMPv2, SNMPv2c or later version, compliant with RFC 2011 SNMPv2 MIB for IP, RFC 2012
SNMPv2 MIB for TCP, RFC 2013 SNMPv2 MIB for UDP

43.3.3 SNMP Traps

The Switch sends traps to an SNMP manager when an event occurs. The following tables outline the
SNMP traps by category.
An OID (Object ID) that begins with "1.3.6.1.4.1.890.1.15" is defined in private MIBs. Otherwise,
it is a standard MIB OID.
Table 188 SNMP System Traps
OPTION
OBJECT LABEL
coldstart
coldStart
warmstart
warmStart
fanspeed
zyHwMonitorFanSpeedOutOfR
ange
poe
zyPoePowerPortOverload
(For PoE
zyPoePowerPortShortCircuit
models
only)
zyPoePowerPortOverSystemB
udget
temperature zyHwMonitorTemperatureOut
OfRange
voltage
zyHwMonitorPowerSupplyVolt
ageOutOfRange
Chapter 43 Access Control
OBJECT ID
1.3.6.1.6.3.1.1.5.1
1.3.6.1.6.3.1.1.5.2
1.3.6.1.4.1.890.1.15.3.26.2.1
1.3.6.1.4.1.890.1.15.3.59.4.1
1.3.6.1.4.1.890.1.15.3.59.4.2
1.3.6.1.4.1.890.1.15.3.59.4.3
1.3.6.1.4.1.890.1.15.3.26.2.2
1.3.6.1.4.1.890.1.15.3.26.2.3
GS3700/XGS3700 Series User's Guide
354
DESCRIPTION
This trap is sent when the Switch is
turned on.
This trap is sent when the Switch
restarts.
This trap is sent when the fan speed goes
above or below the normal operating
range.
This trap is sent when the port is turned
off to supply power due to overloading.
This trap is sent when the port is turned
off to supply power due to short circuit.
This trap is sent when the port is turned
off to supply power because the
requested power exceeds the total PoE
power budget on the Switch.
This trap is sent when the temperature
goes above or below the normal
operating range.
This trap is sent when the voltage goes
above or below the normal operating
range.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xgs3700 series

Table of Contents