ZyXEL Communications GS3700 Series User Manual page 295

Chapter 34 Link Layer Discovery Protocol (LLDP)
The following table describes the labels in this screen.
Table 154 Advanced Application > LLDP > LLDP-MED Location
LABEL DESCRIPTION
Port Enter the port number you want to set up the location within the LLDP-MED network.
Location The LLDP-MED uses geographical coordinates and Civic Address to set the location
Coordinates information of the remote device. Geographical based coordinates includes latitude,
longitude, altitude and datum. Civic Address includes Country, State, County, City, Street
and other related information.
Latitude Enter the latitude information. The value should be from 0º to 90º.
• north
• south
Longitude Enter the longitude information. The value should be from 0º to 180º.
• west
• east
Altitude Enter the altitude information. The value should be from -2097151 to 2097151 in meters
or in floors.
• meters
• floor
Datum Select the appropriate geodetic datum used by GPS.
• WGS84
• NAD83-NAVD88
• NAD83-MLLW
Civic Address Enter the Civic Address by providing information such as Country, State, County, City,
Street, Number, ZIP code and other additional information. Enter at least two field in this
configuration including the Country. The valid length of the Country field is 2 characters
and all other fields are up to 32 characters.
• Country
• State
• County
• City
• Division
• Neighbor
• Street
• Leading-Street-Direction
• Street-Suffix
• Trailing-Street-Suffix
• House-Number
• House-Number-Suffix
• Landmark
• Additional-Location
• Name
• Zip-Code
• Building
• Unit
• Floor
• Room-Number
• Place-Type
• Postal-Community-Name
• Post-Office-Box
• Additional-Code
GS3700/XGS3700 Series User's Guide
295