ZyXEL Communications GS3700 Series User Manual page 355

Table 188 SNMP System Traps (continued)
OPTION OBJECT LABEL
reset zySysMgmtUncontrolledSyste
mReset
zySysMgmtControlledSystem
Reset
zySysMgmtBootImageInconsi
stence
RebootEvent
timesync zyDateTimeTrapTimeServerNo
tReachable
intrusionloc zyPortIntrusionLock
k
loopguard zyLoopGuardLoopDetect
errdisable zyErrdisableDetect
zyErrdisableRecovery
dyinggasp zyHwMonitorDyingGasp
Table 189 SNMP InterfaceTraps
OPTION OBJECT LABEL
linkup linkUp
linkdown linkDown
autonegotiation zyPortAutonegotiationFailed
lldp lldpRemTablesChange
Chapter 43 Access Control
OBJECT ID
1.3.6.1.4.1.890.1.15.3.49.2.1
1.3.6.1.4.1.890.1.15.3.49.2.2
1.3.6.1.4.1.890.1.15.3.49.2.3
1.3.6.1.4.1.890.1.5.1.1.2
1.3.6.1.4.1.890.1.15.3.82.3.1
1.3.6.1.4.1.890.1.15.3.61.3.2
1.3.6.1.4.1.890.1.15.3.45.2.1
1.3.6.1.4.1.890.1.15.3.24.4.1
1.3.6.1.4.1.890.1.15.3.24.4.2
1.3.6.1.4.1.890.1.15.3.26.2.5
OBJECT ID
1.3.6.1.6.3.1.1.5.4
1.3.6.1.6.3.1.1.5.3
1.3.6.1.4.1.890.1.15.3.61.3.1
1.0.8802.1.1.2.0.0.1
GS3700/XGS3700 Series User's Guide
355
DESCRIPTION
This trap is sent when the Switch
automatically resets.
This trap is sent when the Switch resets
by an administrator through a
management interface.
This trap is sent when the index number
of image which is loaded when the Switch
starts up is different from what is
specified via the CLI.
This trap is sent when the Switch reboots
by an administrator through a
management interface.
This trap is sent when the Switch's date
and time is not manually entered or the
specified time server is not reachable.
This trap is sent when intrusion lock
occurs on a port.
This trap is sent when loopguard shuts
down a port.
This trap is sent when an error is
detected on a port, such as a loop occurs
or the rate limit for specific control
packets is exceeded.
This trap is sent when the Switch ceases
the action taken on a port, such as
shutting down the port or discarding
packets on the port, after the specified
recovery interval.
The trap is sent when the device power
goes below the normal value.
DESCRIPTION
This trap is sent when the Ethernet
link is up.
This trap is sent when the Ethernet
link is down.
This trap is sent when an Ethernet
interface fails to auto-negotiate with
the peer Ethernet interface.
The trap is sent when entries in the
remote database have any updates.
Link Layer Discovery Protocol
(LLDP), defined as IEEE 802.1ab,
enables LAN devices that support
LLDP to exchange their configured
settings. This helps eliminate
configuration mismatch issues.