Ipv6 Global Address Setup - ZyXEL Communications GS3700 Series User Manual

Figure 37 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Link-Local Address Setup
The following table describes the labels in this screen.
Table 22 Basic Setting > IPv6 > IPv6 Configuration > IPv6 Link-Local Address Setup
LABEL
Interface
Link-Local Address
Default Gateway
Apply
Cancel
Clear
Index
Interface
IPv6 Link-Local
Address
IPv6 Default
Gateway

6.9.6 IPv6 Global Address Setup

Use this screen to configure the interface's IPv6 global address. Click the link next to IPv6 Global
Address Setup in the IPv6 Configuration screen to display the screen as shown next.
Chapter 6 Basic Setting
DESCRIPTION
Select the IPv6 interface you want to configure.
Manually configure a static IPv6 link-local address for the interface.
Set the default gateway IPv6 address for the interface. When an interface cannot find
a routing information for a frame's destination, it forwards the packet to the default
gateway.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the nonvolatile memory when you are done
configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
This is the interface index number. Click on an index number to change the settings.
This is the name of the IPv6 interface you created.
This is the static IPv6 link-local address for the interface.
This is the default gateway IPv6 address for the interface.
GS3700/XGS3700 Series User's Guide
73