Configuring Vlan Mapping - ZyXEL Communications GS3700 Series User Manual
Gbe l2+ switch
Hide thumbs
Also See for GS3700 Series:
- User manual (549 pages) ,
- Cli reference manual (361 pages) ,
- Handbook (215 pages)
Table of Contents
Advertisement
Figure 155 VLAN Mapping
The following table describes the labels in this screen.
Table 119 VLAN Mapping
LABEL
Active
Port
*
Active
Apply
Cancel
26.3 Configuring VLAN Mapping
Click the VLAN Mapping Configure link in the VLAN Mapping screen to display the screen as
shown. Use this screen to enable and edit the VLAN mapping rule(s).
Chapter 26 VLAN Mapping
DESCRIPTION
Select this option to enable VLAN mapping on the Switch.
This field displays the port number.
Use this row to make the setting the same for all ports. Use this row first and then make
adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Select this check box to enable the VLAN mapping feature on this port. Clear this check box
to disable the VLAN mapping feature.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
GS3700/XGS3700 Series User's Guide
239
Advertisement
Table of Contents
