Mld Snooping-Proxy Filtering Profile - ZyXEL Communications GS3700 Series User Manual
Gbe l2+ switch
Hide thumbs
Also See for GS3700 Series:
- User manual (549 pages) ,
- Cli reference manual (361 pages) ,
- Handbook (215 pages)
Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 92 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering
LABEL
Active
Port
*
Group Limit
Max Group Num.
Filtering Profile
Apply
Cancel
22.4.5 MLD Snooping-proxy Filtering Profile
Use this screen to create an MLD filtering profile and set the range of the multicast address(es).
Click the Filtering Profile link in the Advanced Application > Multicast > IPv6 Multicast >
MLD Snooping-proxy > Filtering screen to display the screen as shown.
Figure 120 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering >
Filtering Profile
Chapter 22 Multicast
DESCRIPTION
Select this option to enable MLD filtering on the Switch.
This field displays the port number.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all ports. Use this row
first to set the common settings and then make adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you make them.
Select this option to limit the number of multicast groups this port is allowed to join.
Enter the number of multicast groups this port is allowed to join. Once a port is registered
in the specified number of multicast groups, any new MLD Report message is dropped on
this port.
Select the name of the MLD filtering profile to use for this port. Otherwise, select Default
to prohibit the port from joining any multicast group.
You can create MLD filtering profiles in the Multicast > IPv6 Multicast > MLD
Snooping-proxy > Filtering > Filtering Profile screen.
Click Apply to save your changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
GS3700/XGS3700 Series User's Guide
191
Advertisement
Table of Contents
