ZyXEL Communications GS3700 Series User Manual page 363

Figure 251 Management > Access Control > Logins
The following table describes the labels in this screen.
Table 197 Management > Access Control > Logins
LABEL DESCRIPTION
Administrator
This is the default administrator account with the "admin" user name. You cannot change the default
administrator user name. Only the administrator has read/write access.
Old Password Type the existing system password (1234 is the default password when shipped).
New Password Enter your new system password.
Retype to Retype your new system password for confirmation
confirm
Edit Logins
You may configure passwords for up to four users. These users have read-only access. You can give users
higher privileges via the CLI. For more information on assigning privileges see the Ethernet Switch CLI
Reference Guide.
User Name Set a user name (up to 32 ASCII characters long).
Password Enter your new system password.
Retype to Retype your new system password for confirmation
confirm
Chapter 43 Access Control
GS3700/XGS3700 Series User's Guide
363