Lldp-Med Network Policy - ZyXEL Communications GS3700 Series User Manual
Gbe l2+ switch
Hide thumbs
Also See for GS3700 Series:
- User manual (549 pages) ,
- Cli reference manual (361 pages) ,
- Handbook (215 pages)
Table of Contents
Advertisement
Figure 189 Advanced Application > LLDP > LLDP-MED Configuration
The following table describes the labels in this screen.
Table 152 Advanced Application > LLDP > LLDP-MED Configuration
LABEL
Port
Notification
Topology
Change
MED TLV Setting
Location
Network Policy
Apply
Cancel
34.8 LLDP-MED Network Policy
Click Advanced Application > LLDP > LLDP-MED Network Policy to display the screen as
shown next.
Chapter 34 Link Layer Discovery Protocol (LLDP)
DESCRIPTION
This displays the port number on which you're configuring LLDP-MED. Select * to
configure all ports simultaneously.
Select to enable LLDP-MED topology change traps on this port.
Select to enable transmitting LLDP-MED location TLV.
Select to enable transmitting LLDP-MED Network Policy TLV.
Click Apply to save the changes to the Switch's run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
GS3700/XGS3700 Series User's Guide
292
Advertisement
Table of Contents
